235
Click the Edit button under “IP Address” to edit the network settings.
Note: Make sure the Ethernet interfaces are connected to the correct switch and
the switch has been configured to support the port trunking mode selected on the
NVR.
The port trunking options available on the NVR:
Round-Robin mode is good for general
purpose load balancing between two
Ethernet interfaces. This mode transmits
packets in sequential order from the first
available slave through the last. Balance-rr
provides load balancing and fault tolerance.
Supports static
trunking. Make sure
static trunking is
enabled on the
switch.
Active Backup uses only one Ethernet
interface. It switches to the second Ethernet
interface if the first Ethernet interface does
not work properly. Only one interface in the
bond is active. The bond's MAC address is
only visible externally on one port (network
adapter) to avoid confusing the switch.
Active Backup mode provides fault
tolerance.
Balance XOR balances traffic by splitting up
Comments to this Manuals