248
Firmware Update
Note: If the system is running properly, you do not need to update the firmware.
Before updating the system firmware, make sure the product model and firmware
version are correct. Follow the steps below to update firmware:
Download the release notes of the firmware from the QNAP Security website
http://www.qnapsecurity.com. Read the release notes carefully to make sure it is
required to update the firmware.
Download the NVR firmware and unzip the IMG file to the computer.
Before updating the system firmware, back up all the disk data on the NVR to
avoid any potential data loss during the system update.
Click “Browse” to select the correct firmware image for the system update. Click
“Update System” to update the firmware.
The system update may take tens of seconds to several minutes to complete
depending on the network connection status. Please wait patiently. The NVR will
inform you when the system update has completed.
Update Firmware by QNAP Qfinder
The NVR firmware can be updated by the QNAP Qfinder. Follow the steps below:
Select a NVR model and choose “Update Firmware” from the “Tools” menu.
Comments to this Manuals