90
5.1.2 Display Mode
The NVR supports different display modes for viewing the monitoring channels.
*You can configure the sequential interval in the sequential mode settings.
5.1.3 PTZ Camera Control Panel
The term ‘PTZ’ stands for ‘Pan/Tilt/Zoom’. If an IP camera supports the PTZ feature,
use the control panel on the NVR to adjust the viewing angle of the IP camera.
These functions are available depending on the camera models. Please refer to the
user manual of the IP cameras for more information. Note that the digital zoom
function will be disabled when the PTZ function is in use.
QVR 5.0 and above hides the PTZ control panel by default. You can enable the PTZ
control panel in the options on the monitoring page.
Note: When you enable multi-display mode and the live view window is too small to
show interactive control buttons, please enable PTZ control panel to control the
camera.
Sequential mode
settings*
Adjust PT angle of
the camera
Select and configure PTZ
camera preset positions
Focus control of the
PTZ camera
Comments to this Manuals