337
Environment 4: The NVR and the IP camera are installed behind the router
In the example, to allow a remote PC to connect to each NVR by FTP, do the
following:
Step 1. Set up the port mapping (virtual server) on the router
Connect to NVR 1 by ftp://219.87.145.205:2001
Connect to NVR 2 by ftp://219.87.145.205:2002
Connect to NVR 3 by ftp://219.87.145.205:2003
Step 2. Enable FTP port mapping on the NVR
To connect to each NVR via FTP by clicking ‘FTP’ on the playback page of each NVR,
enable FTP port mapping in ‘Network Settings’ > ‘File Services’ on the system
administration page and set the mapped port number.
After finishing the above two steps, connect to the NVR via FTP by entering the IP
address in the IE browser or clicking ‘FTP’ on the playback page. Then login the
NVR by the correct user name and password.
Comments to this Manuals